Nalbantov Archives - Alex's Piano Service

Nalbantov

All Floppy Disk Tools

by

WinImage (www.winimage.com)

A comprehensive disk-imaging suite for Windows. Notably, it successfully transfers Yamaha Electone Performance floppy disks when other tools see them as unformatted. Although it can read some Clavinova and Electone floppy disks, it can not read Disklavier floppy disks.

DKVUTILS

Available in DKVUTILS.ZIP on my drive. These are essential utilities for copying and managing Yamaha Disklavier floppy disks.

ESEQ Explorer
Facilitates the creation and management of PIANODIR.FIL for Yamaha Disklavier. Using ESEQ Explorer, you can create PIANODIR.FIL directories for your ESEQ files. This is necessary for older Disklaviers, and also allows you to modify song titles and metadata.

MIDI2SEQ
Convert standard MIDI files to ESEQ for early Yamaha Disklavier compatibility.

ESEQ2MID
Transform Yamaha Disklavier ESEQ files into standard MIDI format. This tool is extremely helpful if you’re transferring your songs from floppy disks from an older Disklavier, to a USB stick for a newer one!

MID2PianoCD (www.kinura.net/mid2pianocd/)

MID2PianoCD is a Windows utility by Mark Fontana for encoding MIDI and ESEQ files into player piano-compatible formats. It supports various electronic player piano systems, including Yamaha Disklavier, PianoDisc iQ, Live Performance LX, Marantz Pianocorder, and QRS Pianomation. You can use it to generates CDs that can be played directly on MIDI player pianos, expanding the versatility of your Disklavier’s music library.

Mark Fontana is an extremely knowledgeable and talented individual, and his software — both this and PPFBU below — are vital staples. He requests donations on his website, and if you find his tools useful, you should support him.

Player Piano Floppy Backup Utility (www.kinura.net/ppfbu/)

Player Piano Floppy Backup Utility (PPFBU) is the premier Windows-based tool for backing up Yamaha Disklavier and PianoDisc floppy disks. It’s an indispensable tool for backing up your old floppy disks. He requests donations on his website, and if you find his tools useful, you should support him. It has a user-friendly interface, and can be used with USB floppy disk drives, even when Windows cannot see or open the disk.

Giebler’s Yamaha DOM Package (https://giebler.biz/)

Giebler produced a utility with wide-ranging compatibility with Yamaha devices. It will read older Yamaha Clavinova disks, in addition to Disklavier disks. However, this software is old, requiring versions of Windows that mostly can’t even be installed outside virtual machines. If you’re interested in how to get this running, read my article on using Giebler to explore old Clavinova disks.

For nearly all purposes, I recommend PPFBU above, although in isolated circumstances this software might make more sense for your particular project. Yamaha still recommends them today.

All software runs under MS-DOS on IBM PC-XT, PC-AT, or compatibles with a hard disk drive and an internal (non-USB) 3 1/2″ floppy disk drive. Most programs are also compatible with MS-DOS shells under Windows 3.1, 95, 98, or ME.

Keirf’s Greaseweazle (https://github.com/keirf/greaseweazle/wiki)

The Greaseweazle allows you to duplicate your Yamaha Disklavier floppy disks — or any other floppy disk — without Windows even necessarily being able to open it. Even better, the Greaseweazle can read your floppy disk as an .hfe file, which you can simply drop onto your Nalbantov USB emulator! It can be used in place of all the tools mentioned above.

The Greaseweazle captures raw flux transitions from drives, enabling the capture and analysis of any disk format, including those used by Disklaviers.

Keirf’s FlashFloppy used with a Gotek

FlashFloppy is a powerful firmware solution for Yamaha Disklavier floppy drive replacement and management. A Gotek floppy disk emulator with FlashFloppy installed, used in conjunction with the Greaseweazle, is the single most reliable method of reading floppy disks in USB stick format.

When paired with Greaseweazle, a Gotek with FlashFloppy becomes an exceptionally powerful tool for managing Yamaha Disklavier floppy disks. Greaseweazle captures raw flux transitions to create accurate disk images, which can then be easily written to or read from using FlashFloppy on your Disklavier.

FlashFloppy is open-source, and Keirf’s tools are incredibly valuable for our purposes transferring old floppies. The FlashFloppy firmware can be challenging to install on a Gotek for the first time, so purchase a Gotek with FlashFloppy already installed.

The alternative to FlashFloppy is HxC’s custom firmware which is paid/closed-source, but is used by Nalbantov below:

Nalbantov (https://floppyusbemulator.com)

Nalbantov provides premium floppy disk emulators tailored for specific Yamaha Disklavier pianos, offering seamless integration and exceptional compatibility. The Nalbantov drive comes with guaranteed compatibility and is easy to use, and their support is excellent.

The Gotek and FlashFloppy solution described above will work as an inexpensive alternative; however, it can be a challenging DIY project, and is not advisable for anyone who isn’t quite comfortable tinkering with their own hardware.

They support a wide range of Yamaha Disklavier models, including early models (MX22, MX80, MX85, MX100A/B, MX116) and advanced models (MX500, Mark II/IIXG/III), as well as various Disklavier Control Units (DKC50R, DKW10, PPC3R, etc.).

For Disklavier owners seeking a reliable and easy-to-use floppy disk emulator with guaranteed compatibility across numerous models, Nalbantov is the best choice. You can search for your model of instrument on their website, and they will send you a properly configured device accompanied by a compatible USB-stick.

Conveniently Rename all ESEQ Files for use with EEXPLORE and PIANODIR.FIL

by

This Python program will recursively rename .FIL files in the specified directory, ensuring they follow the naming convention described, and convert all filenames to uppercase. If, for instance, you have twenty albums, direct this program to run in their parent directory, and all the albums in subdirectories will be corrected.

This script renames all files to be all-caps including extensions, and for the name to be exactly eight characters long with no symbols. It will add filler characters if necessary. It will make sure they’re unique by incrementing a counter. These appear to be the most important factors in making files identifiable to early Disklaviers, based on my experience and those of commenters.

Usage: python renamefordisk.py [TARGET_DIRECTORY]

Just download renamefordisk.py. The source code is also at the bottom of this page.

As mentioned above, this will either correct all the files in the target directory, or will recursively change the names of all .FIL files in subdirectories if pointed at a parent directory. This is very useful if you’re, for instance, transferring many albums using backing up numerous floppy disks.

At this point, you’re ready to use EEXPLORE.EXE to move through each directory and prepare your PIANODIR.FIL. At a future date, I’d like to automate this.

Make certain to back up all files before running this! I can’t guarantee perfect results for all combinations of names and strings of characters.

Filenames before conversion.
Running ESEQ Explorer on the above directory. The names are deformed using MS-DOS shorthand.

The above is not guaranteed to read in a Disklavier. It is not apparent whether this is because of misbehavior by ESEQ Explorer, or is an issue with older Disklaviers. However, this does make it less likely the tracks will read correctly in older systems.

Filenames after conversion.
ESEQ Explorer with proper disk names. Note that the names are consistent with the names in the directories.

If you see the above, it’s quite likely it’ll read in your older Disklavier.

Nalbantov Drive Bay Insert

by

I recently installed a Nalbantov USB drive using an updated version of the insert and mount that I designed.

You can see based on the pictures below that the Nalbantov slim is slightly too small to fill the entire cavity left by the original floppy disk drive. Additionally, there are no mounts of any kind to hold the Nalbantov in place. This insert solves both problems: The drive screws into the insert at just the right distance and depth, and the insert also buffers the area around the outside of the drive.

I’ve included several pictures of how it fits into the case below. If you’d like to 3D print your own, I can provide the CAD file in 3mf format, gcode format, and STL format. If you’d prefer to order one from me, ready printed, you can order a Nalbantov Drive Bay Insert ready-made here.

The insert installed over the screw positions of the original floppy disk drive.
I 3D printed the spacers at 50% infill so they’d be fairly solid. These spacers allow you to use the original machine screws that hold down the OEM floppy disk drive, which is a huge advantage. No visits to the hardware store!

Best USB Stick for Nalbantovs

by

Over the years of installing USB emulators in Disklaviers, I’ve become increasingly choosy about my USB sticks.

My current recommendation is the Kingston 64GB DataTraveler. These are all-metal USB sticks that dissipate heat very nicely, and are durable in the event of an impact. I’ve found them to be both durable and reliable. The 64 GB size is recommended by Nalbantov, as speed with USB sticks correlates with their size, and smaller disks are more likely to cause hiccups with slower speeds.

My previous recommendation:  Previously, I recommended the SanDisk Ultra Fit 64 GB. As a smaller USB stick, it was less likely that people would bump into it. I would tie on some Atwood Micro Cord, and tie off the end in a Lanyard (Diamond) Knot. However, I’ve had multiple instances of these drives suddenly corrupting. I’m not sure why this is, but have now moved on from using them. I have many customers who still use them and like them, but can no longer recommend them.

Below, you can see a USB stick the was struck laterally by a pianist. The solder joint snapped right off! That is an in convenience easily avoided by a good quality, low profile USB stick.

Nalbantov Floppy Disk Drive Upgrades

by

I’ve recently started recommending customers with worn-out floppy disk drives upgrade them to so-called “Floppy Disk Emulators.” There are a couple of these on the market, but it looks like the easiest to use and most reliable is the Nalbantov USB Floppy Disk Emulator. I use these regularly in Yamaha Disklaviers, but they can also be installed in keyboards. I install these quite regularly. If you do order from Nalbantov directly, make sure to use the AlexPiano for a 5% discount on orders from Nalbantov.

Why Upgrade?

There are several reasons why you might want to replace an old floppy disk drive with a USB floppy disk emulator, including:

  1. Increased reliability: USB floppy disk emulators are more reliable than traditional floppy disk drives, as they have no moving parts and are less susceptible to mechanical failure. Most customers reach out to me after their floppy disk drive has failed.
  2. Compatibility: USB floppy disk emulators are compatible with modern computers, which may not have floppy disk drives built-in or may no longer support floppy disks.
  3. Speed: USB floppy disk emulators transfer data faster than traditional floppy disk drives, making it easier and quicker to transfer large amounts of data.
  4. Convenience: USB floppy disk emulators can be easily connected and disconnected, making it easier to transfer data between different computers or to store data.
  5. Cost-effectiveness: USB floppy disk emulators are often more cost-effective than purchasing a new floppy disk drive or repairing an old one.

I’ve found some floppy disk drives now cost more than the replacement USB emulators, especially if they’ve had minimal use. And hardly anybody knows how to actually repair a floppy drive—that’s a nearly lost art.

Operation

After the Nalbantov is installed, you can use a single USB stick to represent up to 1000 floppy disks. Because it’s a floppy disk emulator, the Disklavier actually believes you’re inserting a different floppy disk. As you switch between virtual “disks” by pressing the arrows, you’ll see the display on the Disklavier behave as though you’ve inserted a new disk. Of course, if you have more than 1000 floppy disks, you can invest in another USB stick, although I haven’t run into this particular situation yet!

This is the #2 track on the #27 floppy disk stored on that USB stick!

Installation

Some customers opt to install the Nalbantov unit themselves. Depending on the design, this is quite doable, although I don’t recommend attempting it with most Yamaha MX100II Disklaviers (see below). It is a very easy installation on, for instance, the DKC5R and the DKC500RW, just to pick a couple.

With some generations of Disklavier (most notably Mark II / MX100II / MX100A / MX100B devices), the floppy disk drives are mounted behind a shaped plastic piece. In these cases, you’ll need to cut away the old plastic facing (a pair of flush-cut nippers is helpful here), install the new drive, and put some kind of buffer around it. I’ve experimented with a few different choices for something functional and attractive. Purchasing neoprene strips is a cheap solution.

New solution: I have a 3D model of a floppy bezel that’s sized to fit around a Nalbantov. You can 3D print this yourself, or I can mail you one. This mount holds the Nalbantov in place, and also fills in the gaps around the edges. It’s an all-in-one solution for mounting the Nalbantov, and allows you to reuse the same screws the original floppy disk drive was installed with.

For backing up your current Disklavier floppy disks to a format that can be stored on your USB stick, see my article on Backing up Disklavier Floppy Disks. They can then be moved onto a virtual “disk” with Nalbantov’s proprietary tool.